[DUAL-BOOT] Android + Enigma2

  • 131 Respostas
  • 3431 Visualizações

0 Membros e 1 Visitante estão vendo este tópico.

Offline flyguy

  • *
  • Global Moderator
  • Hero Member
  • *****
  • teste
  • Posts: 12.431
  • Carma: +171/-172
  • Surtei!
« Resposta #120 Online: Outubro 09, 2017, 02:36:59 pm »
O meu trava independente de streaming. Não desligo o meu deco, e às vezes, quando ligo de manhã, está travado...

Qual o lote do seu pixel?
Não respondo dúvidas por MP. Favor usar o fórum para isso!!! ///// Verifique sempre o status do IKaS ou SKaS em: http://freesatelitalhd.com/forum/index.php?board=21.0 // https://github.com/Notos/awesome-atto-pixel

Offline fgushi

  • *
  • Full Member
  • ***
  • Posts: 20
  • Carma: +0/-0
  • Melhores produtos, melhor suporte técnico https://freesatelitalhd.com/
  • Receptor: atto net 4
« Resposta #121 Online: Outubro 09, 2017, 02:48:21 pm »
É de 4 GB

Offline flyguy

  • *
  • Global Moderator
  • Hero Member
  • *****
  • teste
  • Posts: 12.431
  • Carma: +171/-172
  • Surtei!
« Resposta #122 Online: Outubro 09, 2017, 03:15:18 pm »
Não respondo dúvidas por MP. Favor usar o fórum para isso!!! ///// Verifique sempre o status do IKaS ou SKaS em: http://freesatelitalhd.com/forum/index.php?board=21.0 // https://github.com/Notos/awesome-atto-pixel

Offline fgushi

  • *
  • Full Member
  • ***
  • Posts: 20
  • Carma: +0/-0
  • Melhores produtos, melhor suporte técnico https://freesatelitalhd.com/
  • Receptor: atto net 4
« Resposta #123 Online: Outubro 09, 2017, 03:33:30 pm »
Não. Só no enigma2

Offline fgushi

  • *
  • Full Member
  • ***
  • Posts: 20
  • Carma: +0/-0
  • Melhores produtos, melhor suporte técnico https://freesatelitalhd.com/
  • Receptor: atto net 4
« Resposta #124 Online: Outubro 09, 2017, 08:11:45 pm »
Será que pode ser a configuração do oscam? Percebi também, que algumas vezes estou assistindo um canal, e ao mudar de canal, esse outro canal não pega; desligando e religando o pixel vilta ao normal...Configurei o oscam igual ao vídeo indicado alguns post atrás...nunca tinha configurado via windows

Offline leandrotsampa

  • *
  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1.245
  • Carma: +26/-2
  • Ler faz bem, então leia você também. ;P
  • Receptor: Atto NET4, Lexuzbox F90
« Resposta #125 Online: Outubro 09, 2017, 08:31:18 pm »
Já passou pela sua cabeça ver se não é problema no C**S dando uma olhada no log do oscam?

Será que pode ser a configuração do oscam? Percebi também, que algumas vezes estou assistindo um canal, e ao mudar de canal, esse outro canal não pega; desligando e religando o pixel vilta ao normal...Configurei o oscam igual ao vídeo indicado alguns post atrás...nunca tinha configurado via windows

Dentro de um ônibus tem 7 mulheres, cada mulher tem 7 sacolas, cada sacola tem 7 gatos gordos, cada gato gordo tem 7 gatinhos. Contando as patas dos gatos como pernas, quantas pernas tem dentro deste ônibus?

Offline unknownuser

  • *
  • Sr. Member
  • ****
  • Posts: 26
  • Carma: +0/-1
  • Melhores produtos, melhor suporte técnico https://freesatelitalhd.com/
  • Receptor: Atto Pixel
« Resposta #126 Online: Outubro 10, 2017, 11:53:41 am »
No receptor coloque em um canal FTA, e via streaming tente assistir um canal não-FTA.
Veja se ocorre o problema.

Não consegui fazer o teste ontem, mas esse é o resultado, é outro problema, nesse caso ele simplesmente não consegue fazer o streaming, mas não trava

Código: [Selecionar]
2017/10/10 11:48:18 58426E0E c      (ecm) dvbapiau (1802@000000/0000/029F/92:AEEEBFA94285C612F5CF05A6FD47AD16): found (853 ms) by ac68u - BilheteriaCaseira HD
2017/10/10 11:48:33 58426E0E c   (dvbapi) ERROR: Can't open device /dev/dvb/adapter1/ca0 (errno=2 No such file or directory)
2017/10/10 11:48:33 58426E0E c      (ecm) dvbapiau (1802@000000/0000/029F/92:74821B01611BAD87D8E3C0A7DCE9243F): found (807 ms) by ac68u - BilheteriaCaseira HD
2017/10/10 11:48:48 58426E0E c   (dvbapi) ERROR: Can't open device /dev/dvb/adapter1/ca0 (errno=2 No such file or directory)
2017/10/10 11:48:48 58426E0E c      (ecm) dvbapiau (1802@000000/0000/029F/92:2FC60D993014E64BAA323A329F9D1A1D): found (860 ms) by ac68u - BilheteriaCaseira HD
2017/10/10 11:48:49 58426E0E c   (dvbapi) Receiver wants to demux srvid 01F4 on adapter 0000 camask 0001 index 0000 pmtpid 1028
2017/10/10 11:48:49 58426E0E c   (dvbapi) Demuxer 0 continue decoding of SRVID 01F4
2017/10/10 11:48:49 58426E0E c   (dvbapi) Demuxer 1 stop descrambling program number 029F (BilheteriaCaseira HD)
2017/10/10 11:48:49 58426E0E c   (dvbapi) ERROR: Can't open device /dev/dvb/adapter1/ca0 (errno=2 No such file or directory)
2017/10/10 11:48:49 58426E0E c        (-) -- Skipped 1 duplicated log lines --
2017/10/10 11:48:49 58426E0E c        (-) -- Skipped 2 duplicated log lines --
2017/10/10 11:48:49 58426E0E c   (dvbapi) Demuxer 0 found 0 ECMpids and 2 STREAMpids in caPMT
2017/10/10 11:48:51 58426E0E c   (dvbapi) Receiver wants to demux srvid 02A1 on adapter 0001 camask 0001 index 0000 pmtpid 03C8
2017/10/10 11:48:51 58426E0E c   (dvbapi) Demuxer 1 ecmpid 0 CAID: 1802 ECM_PID: 0034 PROVID: 000000
2017/10/10 11:48:51 58426E0E c   (dvbapi) Demuxer 1 ecmpid 1 CAID: 1861 ECM_PID: 0035 PROVID: 000000
2017/10/10 11:48:51 58426E0E c   (dvbapi) Demuxer 1 found 2 ECMpids and 4 STREAMpids in caPMT
2017/10/10 11:48:51 58426E0E c   (dvbapi) Demuxer 1 trying to descramble PID 0 CAID 1802 PROVID 000000 ECMPID 0034 ANY CHID PMTPID 03C8 VPID 03C0
2017/10/10 11:48:51 58426E0E c   (dvbapi) Receiver wants to demux srvid 01F4 on adapter 0000 camask 0001 index 0000 pmtpid 1028
2017/10/10 11:48:51 58426E0E c   (dvbapi) Demuxer 0 continue decoding of SRVID 01F4
2017/10/10 11:48:51 58426E0E c   (dvbapi) Demuxer 0 found 0 ECMpids and 2 STREAMpids in caPMT
2017/10/10 11:48:51 58426E0E c   (dvbapi) Demuxer 1 found channel in cache and matching prio -> start descrambling ecmpid 0
2017/10/10 11:48:51 58426E0E c   (dvbapi) Demuxer 1 trying to descramble PID 0 CAID 1802 PROVID 000000 ECMPID 0034 ANY CHID PMTPID 03C8 VPID 03C0
2017/10/10 11:48:51 58426E0E c   (dvbapi) ERROR: Can't open device /dev/dvb/adapter1/ca0 (errno=2 No such file or directory)
2017/10/10 11:48:51 58426E0E c        (-) -- Skipped 9 duplicated log lines --
2017/10/10 11:48:51 58426E0E c      (ecm) dvbapiau (1802@000000/0000/02A1/92:741EB8511FA5D14F1F7CD7E92C8AAC9C): found (168 ms) by ac68u - BilheteriaCaseira Plus HD
2017/10/10 11:48:51 58426E0E c   (dvbapi) Demuxer 1 found 2 ECMpids and 4 STREAMpids in PMT
2017/10/10 11:48:52 58426E0E c   (dvbapi) ERROR: Can't open device /dev/dvb/adapter1/ca0 (errno=2 No such file or directory)
2017/10/10 11:48:52 58426E0E c      (ecm) dvbapiau (1802@000000/0000/02A1/92:4A844C82ABFBF0F50F80D473971F08F6): found (803 ms) by ac68u - BilheteriaCaseira Plus HD

Offline leandrotsampa

  • *
  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1.245
  • Carma: +26/-2
  • Ler faz bem, então leia você também. ;P
  • Receptor: Atto NET4, Lexuzbox F90
« Resposta #127 Online: Outubro 10, 2017, 01:07:41 pm »
Hmmm blz, este problema já foi resolvido.
Se der final de semana eu libero a última build, está mais estável.

Não consegui fazer o teste ontem, mas esse é o resultado, é outro problema, nesse caso ele simplesmente não consegue fazer o streaming, mas não trava

Código: [Selecionar]
2017/10/10 11:48:18 58426E0E c      (ecm) dvbapiau (1802@000000/0000/029F/92:AEEEBFA94285C612F5CF05A6FD47AD16): found (853 ms) by ac68u - BilheteriaCaseira HD
2017/10/10 11:48:33 58426E0E c   (dvbapi) ERROR: Can't open device /dev/dvb/adapter1/ca0 (errno=2 No such file or directory)
2017/10/10 11:48:33 58426E0E c      (ecm) dvbapiau (1802@000000/0000/029F/92:74821B01611BAD87D8E3C0A7DCE9243F): found (807 ms) by ac68u - BilheteriaCaseira HD
2017/10/10 11:48:48 58426E0E c   (dvbapi) ERROR: Can't open device /dev/dvb/adapter1/ca0 (errno=2 No such file or directory)
2017/10/10 11:48:48 58426E0E c      (ecm) dvbapiau (1802@000000/0000/029F/92:2FC60D993014E64BAA323A329F9D1A1D): found (860 ms) by ac68u - BilheteriaCaseira HD
2017/10/10 11:48:49 58426E0E c   (dvbapi) Receiver wants to demux srvid 01F4 on adapter 0000 camask 0001 index 0000 pmtpid 1028
2017/10/10 11:48:49 58426E0E c   (dvbapi) Demuxer 0 continue decoding of SRVID 01F4
2017/10/10 11:48:49 58426E0E c   (dvbapi) Demuxer 1 stop descrambling program number 029F (BilheteriaCaseira HD)
2017/10/10 11:48:49 58426E0E c   (dvbapi) ERROR: Can't open device /dev/dvb/adapter1/ca0 (errno=2 No such file or directory)
2017/10/10 11:48:49 58426E0E c        (-) -- Skipped 1 duplicated log lines --
2017/10/10 11:48:49 58426E0E c        (-) -- Skipped 2 duplicated log lines --
2017/10/10 11:48:49 58426E0E c   (dvbapi) Demuxer 0 found 0 ECMpids and 2 STREAMpids in caPMT
2017/10/10 11:48:51 58426E0E c   (dvbapi) Receiver wants to demux srvid 02A1 on adapter 0001 camask 0001 index 0000 pmtpid 03C8
2017/10/10 11:48:51 58426E0E c   (dvbapi) Demuxer 1 ecmpid 0 CAID: 1802 ECM_PID: 0034 PROVID: 000000
2017/10/10 11:48:51 58426E0E c   (dvbapi) Demuxer 1 ecmpid 1 CAID: 1861 ECM_PID: 0035 PROVID: 000000
2017/10/10 11:48:51 58426E0E c   (dvbapi) Demuxer 1 found 2 ECMpids and 4 STREAMpids in caPMT
2017/10/10 11:48:51 58426E0E c   (dvbapi) Demuxer 1 trying to descramble PID 0 CAID 1802 PROVID 000000 ECMPID 0034 ANY CHID PMTPID 03C8 VPID 03C0
2017/10/10 11:48:51 58426E0E c   (dvbapi) Receiver wants to demux srvid 01F4 on adapter 0000 camask 0001 index 0000 pmtpid 1028
2017/10/10 11:48:51 58426E0E c   (dvbapi) Demuxer 0 continue decoding of SRVID 01F4
2017/10/10 11:48:51 58426E0E c   (dvbapi) Demuxer 0 found 0 ECMpids and 2 STREAMpids in caPMT
2017/10/10 11:48:51 58426E0E c   (dvbapi) Demuxer 1 found channel in cache and matching prio -> start descrambling ecmpid 0
2017/10/10 11:48:51 58426E0E c   (dvbapi) Demuxer 1 trying to descramble PID 0 CAID 1802 PROVID 000000 ECMPID 0034 ANY CHID PMTPID 03C8 VPID 03C0
2017/10/10 11:48:51 58426E0E c   (dvbapi) ERROR: Can't open device /dev/dvb/adapter1/ca0 (errno=2 No such file or directory)
2017/10/10 11:48:51 58426E0E c        (-) -- Skipped 9 duplicated log lines --
2017/10/10 11:48:51 58426E0E c      (ecm) dvbapiau (1802@000000/0000/02A1/92:741EB8511FA5D14F1F7CD7E92C8AAC9C): found (168 ms) by ac68u - BilheteriaCaseira Plus HD
2017/10/10 11:48:51 58426E0E c   (dvbapi) Demuxer 1 found 2 ECMpids and 4 STREAMpids in PMT
2017/10/10 11:48:52 58426E0E c   (dvbapi) ERROR: Can't open device /dev/dvb/adapter1/ca0 (errno=2 No such file or directory)
2017/10/10 11:48:52 58426E0E c      (ecm) dvbapiau (1802@000000/0000/02A1/92:4A844C82ABFBF0F50F80D473971F08F6): found (803 ms) by ac68u - BilheteriaCaseira Plus HD

Dentro de um ônibus tem 7 mulheres, cada mulher tem 7 sacolas, cada sacola tem 7 gatos gordos, cada gato gordo tem 7 gatinhos. Contando as patas dos gatos como pernas, quantas pernas tem dentro deste ônibus?

Offline unknownuser

  • *
  • Sr. Member
  • ****
  • Posts: 26
  • Carma: +0/-1
  • Melhores produtos, melhor suporte técnico https://freesatelitalhd.com/
  • Receptor: Atto Pixel
« Resposta #128 Online: Outubro 10, 2017, 02:15:54 pm »
Show!
Hoje estou conseguindo reproduzir o erro que falei, de o segundo stream sempre travar o receptor..
Não parece ser culpa do oscam,  no meu teste, usei o tvheadend pra pegar a url do enigma (ainda codificada, mas com ecm) e decodifiquei direto nele..

Um outro erro completamente não relacionado, a legenda no canal Space HD, fica no meio da tela, alinhada a esquerda, (parece q esta renderizando só a legenda como se a tela fosse outra resolução 720p ou menos)
« Última modificação: Outubro 10, 2017, 03:43:22 pm por unknownuser »

Offline unknownuser

  • *
  • Sr. Member
  • ****
  • Posts: 26
  • Carma: +0/-1
  • Melhores produtos, melhor suporte técnico https://freesatelitalhd.com/
  • Receptor: Atto Pixel
« Resposta #129 Online: Outubro 12, 2017, 09:51:06 am »
Hmmm blz, este problema já foi resolvido.
Se der final de semana eu libero a última build, está mais estável.

Nesse caso, deu o erro, dei um init 5 e killall enigma2, depois abri o enigma2 pelo terminal e fiquei vendo o log, deu erro no primeiro streaming.
Edit: Parece que ele trava quando faz uma segunda tentativa depois de ocorrer um "broken startcode"

Código: [Selecionar]
09:45:56.0790 base/ebase.cpp:279 processOneEvent poll: unhandled POLLERR/HUP/NVAL for fd 58(16)
09:46:02.0763 base/ebase.cpp:279 processOneEvent poll: unhandled POLLERR/HUP/NVAL for fd 58(16)
09:46:08.2169 base/ebase.cpp:279 processOneEvent poll: unhandled POLLERR/HUP/NVAL for fd 58(16)
09:46:14.1025 base/ebase.cpp:279 processOneEvent poll: unhandled POLLERR/HUP/NVAL for fd 58(16)
09:46:35.6974 dvb/streamserver.cpp:194 notifier [eDVBServiceStream] stream ref: 1:0:1:206:2E:A:FFFF0000:0:0:0::TV
09:46:35.6977 dvb/dvb.cpp:1438 allocateChannel allocate channel.. 002e:000a
09:46:35.6977 dvb/dvb.cpp:1441 allocateChannel available channel.. 003f:000a
09:46:35.6977 dvb/dvb.cpp:1046 allocateFrontend Slot 0, score 2... but BUSY!!!!!!!!!!!
09:46:35.6977 dvb/dvb.cpp:1033 allocateFrontend Slot 1, score 2
09:46:35.6978 dvb/dvb.cpp:1033 allocateFrontend Slot 2, score 2
09:46:35.6980 dvb/frontend.cpp:713 openFrontend m_need_delivery_system_workaround = 0
09:46:35.6980 dvb/frontend.cpp:715 openFrontend opening frontend 0
09:46:35.6986 dvb/frontend.cpp:2921 tune tune tuner 0
09:46:35.6986 dvb/frontend.cpp:2867 prepare_cable frontend 0 tuning dvb-c to 477000 khz, sr 5217000, fec 3, modulation 5, inversion 2
09:46:35.6987 dvb/dvb.cpp:1915 frontendStateChanged OURSTATE: tuner 0 tuning
09:46:35.6987 dvb/pmt.cpp:990 tuneExt allocate Channel: res 0
09:46:35.6988 dvb_ci/dvbci.cpp:786 addPMTHandler [eDVBCIInterfaces] addPMTHandler 1:0:1:206:2E:A:FFFF0000:0:0:0::TV
09:46:35.6988 dvb/dvb.cpp:1138 allocateDemux allocate demux
09:46:35.6988 dvb/demux.cpp:64 openDemux [eDVBDemux] open demux /dev/dvb/adapter1/demux0
09:46:35.6990 service/servicedvbstream.cpp:127 doRecord [eDVBServiceStream] try it again when we are tuned in
09:46:35.6990 dvb/frontend.cpp:1882 tuneLoopInt [SEC] tuner 0 setVoltage 0
09:46:35.6991 dvb/frontend.cpp:2367 tuneLoopInt [SEC] tuner 0 newTunertype 1
09:46:35.6991 dvb/frontend.cpp:1984 tuneLoopInt [SEC] tuner 0 startTuneTimeout 5000
09:46:35.6992 dvb/frontend.cpp:1977 tuneLoopInt [SEC] tuner 0 setFrontend: events enabled
09:46:35.6992 dvb/frontend.cpp:2395 setFrontend setting frontend 0 events: on
09:46:35.7305 dvb/frontend.cpp:1050 feEvent (0)fe event: status 0, inversion off, m_tuning 1
09:46:35.7813 dvb/frontend.cpp:1050 feEvent (0)fe event: status 1f, inversion off, m_tuning 2
09:46:35.7814 dvb/dvb.cpp:1911 frontendStateChanged OURSTATE: tuner 0 ok
09:46:35.7814 dvb/dvbtime.cpp:674 DVBChannelStateChanged [eDVBLocalTimerHandler] channel 0x22c08e0 running
09:46:35.7815 dvb/demux.cpp:64 openDemux [eDVBDemux] open demux /dev/dvb/adapter1/demux0
09:46:35.7816 dvb/epgcache.cpp:680 DVBChannelStateChanged [eEPGCache] channel 0x22c08e0 running
09:46:35.7816 dvb/demux.cpp:64 openDemux [eDVBDemux] open demux /dev/dvb/adapter1/demux0
09:46:35.7816 dvb/demux.cpp:64 openDemux [eDVBDemux] open demux /dev/dvb/adapter1/demux0
09:46:35.7817 dvb/demux.cpp:64 openDemux [eDVBDemux] open demux /dev/dvb/adapter1/demux0
09:46:35.7817 dvb/demux.cpp:64 openDemux [eDVBDemux] open demux /dev/dvb/adapter1/demux0
09:46:35.7818 dvb/demux.cpp:64 openDemux [eDVBDemux] open demux /dev/dvb/adapter1/demux0
09:46:35.7818 dvb/demux.cpp:64 openDemux [eDVBDemux] open demux /dev/dvb/adapter1/demux0
09:46:35.7818 dvb/demux.cpp:64 openDemux [eDVBDemux] open demux /dev/dvb/adapter1/demux0
09:46:35.7819 dvb/demux.cpp:64 openDemux [eDVBDemux] open demux /dev/dvb/adapter1/demux0
09:46:35.7819 dvb/demux.cpp:64 openDemux [eDVBDemux] open demux /dev/dvb/adapter1/demux0
09:46:35.7819 dvb/demux.cpp:64 openDemux [eDVBDemux] open demux /dev/dvb/adapter1/demux0
09:46:35.7820 dvb/demux.cpp:64 openDemux [eDVBDemux] open demux /dev/dvb/adapter1/demux0
09:46:35.7820 dvb/demux.cpp:64 openDemux [eDVBDemux] open demux /dev/dvb/adapter1/demux0
09:46:35.7820 dvb/demux.cpp:64 openDemux [eDVBDemux] open demux /dev/dvb/adapter1/demux0
09:46:35.7821 dvb/dvb.cpp:1517 DVBChannelStateChanged stop release channel timer
09:46:35.7821 dvb/pmt.cpp:77 channelStateChanged ok ... now we start!!
09:46:35.7821 service/servicedvbstream.cpp:26 serviceEvent STREAM service event 5
09:46:35.7821 service/servicedvbstream.cpp:127 doRecord [eDVBServiceStream] try it again when we are tuned in
09:46:35.7822 dvb/cahandler.cpp:267 registerService [eDVBCAService] new service 1:0:1:206:2E:A:FFFF0000:0:0:0::TV in adapter 1.
09:46:35.7823 dvb/cahandler.cpp:285 registerService [eDVBCAService] add demux 0 to slot 0 service 1:0:1:206:2E:A:FFFF0000:0:0:0::TV
09:46:35.7823 dvb/demux.cpp:64 openDemux [eDVBDemux] open demux /dev/dvb/adapter1/demux0
09:46:35.7823 dvb/epgcache.cpp:2071 startChannel [EPGC] next update in 2 sec
09:46:35.7824 service/servicedvbstream.cpp:26 serviceEvent STREAM service event 6
09:46:35.7824 service/servicedvbstream.cpp:31 serviceEvent [eDVBServiceStream] tuned.. m_state 1 m_want_record 1
09:46:35.7825 dvb/demux.cpp:64 openDemux [eDVBDemux] open demux /dev/dvb/adapter1/demux0
09:46:35.7826 dvb/demux.cpp:631 eDVBRecordStreamThread [eDVBRecordStreamThread] allocated 40 buffers of 188 kB
09:46:35.7826 service/servicedvbstream.cpp:149 doRecord start streaming...
09:46:35.7827 service/servicedvbstream.cpp:332 recordCachedPids [eDVBServiceStream] no cached pids found
09:46:35.7827 service/servicedvbstream.cpp:202 doRecord STREAM: have 1 video stream(s) (1000), and 1 audio stream(s) (1001), and the pcr pid is 0100, and the text pid is ffffffff
09:46:35.7828 service/servicedvbstream.cpp:369 recordPids [eDVBServiceStream] ADD PID: 0000
09:46:35.7828 service/servicedvbstream.cpp:369 recordPids [eDVBServiceStream] ADD PID: 0014
09:46:35.7828 service/servicedvbstream.cpp:369 recordPids [eDVBServiceStream] ADD PID: 0100
09:46:35.7828 service/servicedvbstream.cpp:369 recordPids [eDVBServiceStream] ADD PID: 1000
09:46:35.7829 service/servicedvbstream.cpp:369 recordPids [eDVBServiceStream] ADD PID: 1001
09:46:35.7829 dvb/demux.cpp:740 start HISILICON: Open demux (/dev/dvb/adapter1/demux0).
09:46:35.7831 base/ioprio.cpp:91 setIoPrio setIoPrio realtime level 7 ok
09:46:35.7831 base/filepush.cpp:372 thread [eFilePushThreadRecorder] THREAD START
09:46:35.7832 dvb/demux.cpp:912 startPID [adenin]add PID 20(0x0014)
09:46:35.7832 dvb/demux.cpp:912 startPID [adenin]add PID 256(0x0100)
09:46:35.7832 dvb/demux.cpp:912 startPID [adenin]add PID 4096(0x1000)
09:46:35.7834 dvb/demux.cpp:912 startPID [adenin]add PID 4097(0x1001)
09:46:35.7837 dvb/demux.cpp:64 openDemux [eDVBDemux] open demux /dev/dvb/adapter1/demux0
09:46:35.8059 dvb/dvbtime.cpp:478 updateTime [eDVBLocalTimerHandler] Transponder time is 12.10.2017 09:46:35
09:46:35.8060 dvb/dvbtime.cpp:491 updateTime [eDVBLocalTimerHandler] diff is 0
09:46:35.8060 dvb/dvbtime.cpp:494 updateTime [eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
09:46:35.8061 dvb/dvbtime.cpp:555 updateTime [eDVBLocalTimerHandler] not changed
09:46:35.8228 dvb/pmt.cpp:202 PATready PATready
09:46:35.8229 dvb/pmt.cpp:213 PATready PAT TSID: 0x002e (46)
09:46:35.8230 dvb/pmt.cpp:242 PATready use pmtpid 1008 for service_id 0206
09:46:35.8230 dvb/demux.cpp:64 openDemux [eDVBDemux] open demux /dev/dvb/adapter1/demux0
09:46:35.8232 dvb/demux.cpp:64 openDemux [eDVBDemux] open demux /dev/dvb/adapter1/demux0
09:46:35.8234 dvb/demux.cpp:64 openDemux [eDVBDemux] open demux /dev/dvb/adapter1/demux0
09:46:35.8235 dvb/demux.cpp:64 openDemux [eDVBDemux] open demux /dev/dvb/adapter1/demux0
09:46:35.8900 dvb/pvrparse.cpp:909 processPacket broken startcode
09:46:35.8903 dvb/pvrparse.cpp:909 processPacket broken startcode
09:46:35.8904 dvb/pvrparse.cpp:909 processPacket broken startcode
09:46:35.8924 base/wrappers.cpp:66 singleRead singleRead error (Connection reset by peer)
09:46:35.8925 service/servicedvbstream.cpp:81 stop [eDVBServiceStream] stop streaming m_state 2
09:46:36.0035 dvb/pvrparse.cpp:909 processPacket broken startcode
09:46:36.0037 dvb/pvrparse.cpp:909 processPacket broken startcode
09:46:36.0037 dvb/pvrparse.cpp:909 processPacket broken startcode
09:46:36.0038 dvb/pvrparse.cpp:909 processPacket broken startcode
09:46:36.1926 base/filepush.cpp:439 stop [eFilePushThreadRecorder] stopping thread.
09:46:36.2024 dvb/demux.cpp:674 flush [eDVBRecordStreamThread] cancelling aio
09:46:36.2026 dvb/demux.cpp:684 flush [eDVBRecordStreamThread] all done
09:46:36.2026 dvb/demux.cpp:607 flush [eDVBRecordFileThread] waiting for aio to complete
09:46:36.2027 dvb/demux.cpp:489 wait [eDVBRecordFileThread] wait: aio_return returned failure: Interrupted system call
09:46:36.2027 dvb/demux.cpp:613 flush [eDVBRecordFileThread] buffer usage histogram (40 buffers of 188 kB)
09:46:36.2028 dvb/demux.cpp:616 flush       1:      2
09:46:36.2028 base/filepush.cpp:423 thread [eFilePushThreadRecorder] THREAD STOP
09:46:36.2031 service/servicedvbstream.cpp:81 stop [eDVBServiceStream] stop streaming m_state 0
09:46:36.4016 dvb/cahandler.cpp:333 unregisterService [eDVBCAService] free slot 0 demux 0 for service 1:0:1:206:2E:A:FFFF0000:0:0:0::TV
09:46:36.4017 dvb/cahandler.cpp:497 ~eDVBCAService [eDVBCAService] free service 1:0:1:206:2E:A:FFFF0000:0:0:0::TV
09:46:36.8677 dvb/dvb.cpp:1523 DVBChannelStateChanged start release channel timer
09:46:36.8678 base/ebase.cpp:279 processOneEvent poll: unhandled POLLERR/HUP/NVAL for fd 54(24)
09:46:36.8679 base/ebase.cpp:279 processOneEvent poll: unhandled POLLERR/HUP/NVAL for fd 70(16)
09:46:36.8692 dvb/streamserver.cpp:194 notifier [eDVBServiceStream] stream ref: 1:0:1:206:2E:A:FFFF0000:0:0:0::TV
09:46:36.8694 dvb/dvb.cpp:1517 DVBChannelStateChanged stop release channel timer
09:46:36.8695 dvb/dvb.cpp:1523 DVBChannelStateChanged start release channel timer
09:46:36.8695 dvb/dvb.cpp:1424 allocateChannel use cached_channel, frontend=1
09:46:36.8695 dvb/dvb.cpp:1517 DVBChannelStateChanged stop release channel timer
09:46:36.8696 dvb/pmt.cpp:990 tuneExt allocate Channel: res 0
09:46:36.8696 dvb_ci/dvbci.cpp:786 addPMTHandler [eDVBCIInterfaces] addPMTHandler 1:0:1:206:2E:A:FFFF0000:0:0:0::TV
09:46:36.8697 dvb/pmt.cpp:77 channelStateChanged ok ... now we start!!
09:46:36.8697 service/servicedvbstream.cpp:26 serviceEvent STREAM service event 5
09:46:36.8698 dvb/cahandler.cpp:267 registerService [eDVBCAService] new service 1:0:1:206:2E:A:FFFF0000:0:0:0::TV in adapter 1.
09:46:36.8698 dvb/cahandler.cpp:285 registerService [eDVBCAService] add demux 0 to slot 0 service 1:0:1:206:2E:A:FFFF0000:0:0:0::TV
09:46:36.8699 dvb/demux.cpp:64 openDemux [eDVBDemux] open demux /dev/dvb/adapter1/demux0
09:46:36.8700 service/servicedvbstream.cpp:26 serviceEvent STREAM service event 6
09:46:36.8700 service/servicedvbstream.cpp:31 serviceEvent [eDVBServiceStream] tuned.. m_state 1 m_want_record 0
09:46:36.8700 dvb/demux.cpp:64 openDemux [eDVBDemux] open demux /dev/dvb/adapter1/demux0
09:46:37.0070 dvb/demux.cpp:631 eDVBRecordStreamThread [eDVBRecordStreamThread] allocated 40 buffers of 188 kB
09:46:37.0071 service/servicedvbstream.cpp:149 doRecord start streaming...
09:46:37.0072 service/servicedvbstream.cpp:332 recordCachedPids [eDVBServiceStream] no cached pids found
09:46:37.0072 service/servicedvbstream.cpp:202 doRecord STREAM: have 1 video stream(s) (1000), and 1 audio stream(s) (1001), and the pcr pid is 0100, and the text pid is ffffffff
09:46:37.0073 service/servicedvbstream.cpp:369 recordPids [eDVBServiceStream] ADD PID: 0000
09:46:37.0073 service/servicedvbstream.cpp:369 recordPids [eDVBServiceStream] ADD PID: 0014
09:46:37.0073 service/servicedvbstream.cpp:369 recordPids [eDVBServiceStream] ADD PID: 0100
09:46:37.0074 service/servicedvbstream.cpp:369 recordPids [eDVBServiceStream] ADD PID: 1000
09:46:37.0074 service/servicedvbstream.cpp:369 recordPids [eDVBServiceStream] ADD PID: 1001
09:46:37.0075 dvb/demux.cpp:740 start HISILICON: Open demux (/dev/dvb/adapter1/demux0).
09:46:37.0078 base/ioprio.cpp:91 setIoPrio setIoPrio realtime level 7 ok
09:46:37.0078 base/filepush.cpp:372 thread [eFilePushThreadRecorder] THREAD START
09:46:37.0079 dvb/demux.cpp:912 startPID [adenin]add PID 20(0x0014)
09:46:37.2178 dvb/demux.cpp:912 startPID [adenin]add PID 256(0x0100)
09:46:37.7858 dvb/epgcache.cpp:1594 startEPG [EPGC] start caching events
09:46:40.0373 gdi/grc.cpp:193 thread main thread is non-idle! display spinner!
« Última modificação: Outubro 12, 2017, 10:38:59 am por unknownuser »

Offline flyguy

  • *
  • Global Moderator
  • Hero Member
  • *****
  • teste
  • Posts: 12.431
  • Carma: +171/-172
  • Surtei!
« Resposta #130 Online: Outubro 12, 2017, 01:34:25 pm »
Nesse caso, deu o erro, dei um init 5 e killall enigma2, depois abri o enigma2 pelo terminal e fiquei vendo o log, deu erro no primeiro streaming.
Edit: Parece que ele trava quando faz uma segunda tentativa depois de ocorrer um "broken startcode"

Código: [Selecionar]
09:45:56.0790 base/ebase.cpp:279 processOneEvent poll: unhandled POLLERR/HUP/NVAL for fd 58(16)
09:46:02.0763 base/ebase.cpp:279 processOneEvent poll: unhandled POLLERR/HUP/NVAL for fd 58(16)
09:46:08.2169 base/ebase.cpp:279 processOneEvent poll: unhandled POLLERR/HUP/NVAL for fd 58(16)
09:46:14.1025 base/ebase.cpp:279 processOneEvent poll: unhandled POLLERR/HUP/NVAL for fd 58(16)
09:46:35.6974 dvb/streamserver.cpp:194 notifier [eDVBServiceStream] stream ref: 1:0:1:206:2E:A:FFFF0000:0:0:0::TV
09:46:35.6977 dvb/dvb.cpp:1438 allocateChannel allocate channel.. 002e:000a
09:46:35.6977 dvb/dvb.cpp:1441 allocateChannel available channel.. 003f:000a
09:46:35.6977 dvb/dvb.cpp:1046 allocateFrontend Slot 0, score 2... but BUSY!!!!!!!!!!!
09:46:35.6977 dvb/dvb.cpp:1033 allocateFrontend Slot 1, score 2
09:46:35.6978 dvb/dvb.cpp:1033 allocateFrontend Slot 2, score 2
09:46:35.6980 dvb/frontend.cpp:713 openFrontend m_need_delivery_system_workaround = 0
09:46:35.6980 dvb/frontend.cpp:715 openFrontend opening frontend 0
09:46:35.6986 dvb/frontend.cpp:2921 tune tune tuner 0
09:46:35.6986 dvb/frontend.cpp:2867 prepare_cable frontend 0 tuning dvb-c to 477000 khz, sr 5217000, fec 3, modulation 5, inversion 2
09:46:35.6987 dvb/dvb.cpp:1915 frontendStateChanged OURSTATE: tuner 0 tuning
09:46:35.6987 dvb/pmt.cpp:990 tuneExt allocate Channel: res 0
09:46:35.6988 dvb_ci/dvbci.cpp:786 addPMTHandler [eDVBCIInterfaces] addPMTHandler 1:0:1:206:2E:A:FFFF0000:0:0:0::TV
09:46:35.6988 dvb/dvb.cpp:1138 allocateDemux allocate demux
09:46:35.6988 dvb/demux.cpp:64 openDemux [eDVBDemux] open demux /dev/dvb/adapter1/demux0
09:46:35.6990 service/servicedvbstream.cpp:127 doRecord [eDVBServiceStream] try it again when we are tuned in
09:46:35.6990 dvb/frontend.cpp:1882 tuneLoopInt [SEC] tuner 0 setVoltage 0
09:46:35.6991 dvb/frontend.cpp:2367 tuneLoopInt [SEC] tuner 0 newTunertype 1
09:46:35.6991 dvb/frontend.cpp:1984 tuneLoopInt [SEC] tuner 0 startTuneTimeout 5000
09:46:35.6992 dvb/frontend.cpp:1977 tuneLoopInt [SEC] tuner 0 setFrontend: events enabled
09:46:35.6992 dvb/frontend.cpp:2395 setFrontend setting frontend 0 events: on
09:46:35.7305 dvb/frontend.cpp:1050 feEvent (0)fe event: status 0, inversion off, m_tuning 1
09:46:35.7813 dvb/frontend.cpp:1050 feEvent (0)fe event: status 1f, inversion off, m_tuning 2
09:46:35.7814 dvb/dvb.cpp:1911 frontendStateChanged OURSTATE: tuner 0 ok
09:46:35.7814 dvb/dvbtime.cpp:674 DVBChannelStateChanged [eDVBLocalTimerHandler] channel 0x22c08e0 running
09:46:35.7815 dvb/demux.cpp:64 openDemux [eDVBDemux] open demux /dev/dvb/adapter1/demux0
09:46:35.7816 dvb/epgcache.cpp:680 DVBChannelStateChanged [eEPGCache] channel 0x22c08e0 running
09:46:35.7816 dvb/demux.cpp:64 openDemux [eDVBDemux] open demux /dev/dvb/adapter1/demux0
09:46:35.7816 dvb/demux.cpp:64 openDemux [eDVBDemux] open demux /dev/dvb/adapter1/demux0
09:46:35.7817 dvb/demux.cpp:64 openDemux [eDVBDemux] open demux /dev/dvb/adapter1/demux0
09:46:35.7817 dvb/demux.cpp:64 openDemux [eDVBDemux] open demux /dev/dvb/adapter1/demux0
09:46:35.7818 dvb/demux.cpp:64 openDemux [eDVBDemux] open demux /dev/dvb/adapter1/demux0
09:46:35.7818 dvb/demux.cpp:64 openDemux [eDVBDemux] open demux /dev/dvb/adapter1/demux0
09:46:35.7818 dvb/demux.cpp:64 openDemux [eDVBDemux] open demux /dev/dvb/adapter1/demux0
09:46:35.7819 dvb/demux.cpp:64 openDemux [eDVBDemux] open demux /dev/dvb/adapter1/demux0
09:46:35.7819 dvb/demux.cpp:64 openDemux [eDVBDemux] open demux /dev/dvb/adapter1/demux0
09:46:35.7819 dvb/demux.cpp:64 openDemux [eDVBDemux] open demux /dev/dvb/adapter1/demux0
09:46:35.7820 dvb/demux.cpp:64 openDemux [eDVBDemux] open demux /dev/dvb/adapter1/demux0
09:46:35.7820 dvb/demux.cpp:64 openDemux [eDVBDemux] open demux /dev/dvb/adapter1/demux0
09:46:35.7820 dvb/demux.cpp:64 openDemux [eDVBDemux] open demux /dev/dvb/adapter1/demux0
09:46:35.7821 dvb/dvb.cpp:1517 DVBChannelStateChanged stop release channel timer
09:46:35.7821 dvb/pmt.cpp:77 channelStateChanged ok ... now we start!!
09:46:35.7821 service/servicedvbstream.cpp:26 serviceEvent STREAM service event 5
09:46:35.7821 service/servicedvbstream.cpp:127 doRecord [eDVBServiceStream] try it again when we are tuned in
09:46:35.7822 dvb/cahandler.cpp:267 registerService [eDVBCAService] new service 1:0:1:206:2E:A:FFFF0000:0:0:0::TV in adapter 1.
09:46:35.7823 dvb/cahandler.cpp:285 registerService [eDVBCAService] add demux 0 to slot 0 service 1:0:1:206:2E:A:FFFF0000:0:0:0::TV
09:46:35.7823 dvb/demux.cpp:64 openDemux [eDVBDemux] open demux /dev/dvb/adapter1/demux0
09:46:35.7823 dvb/epgcache.cpp:2071 startChannel [EPGC] next update in 2 sec
09:46:35.7824 service/servicedvbstream.cpp:26 serviceEvent STREAM service event 6
09:46:35.7824 service/servicedvbstream.cpp:31 serviceEvent [eDVBServiceStream] tuned.. m_state 1 m_want_record 1
09:46:35.7825 dvb/demux.cpp:64 openDemux [eDVBDemux] open demux /dev/dvb/adapter1/demux0
09:46:35.7826 dvb/demux.cpp:631 eDVBRecordStreamThread [eDVBRecordStreamThread] allocated 40 buffers of 188 kB
09:46:35.7826 service/servicedvbstream.cpp:149 doRecord start streaming...
09:46:35.7827 service/servicedvbstream.cpp:332 recordCachedPids [eDVBServiceStream] no cached pids found
09:46:35.7827 service/servicedvbstream.cpp:202 doRecord STREAM: have 1 video stream(s) (1000), and 1 audio stream(s) (1001), and the pcr pid is 0100, and the text pid is ffffffff
09:46:35.7828 service/servicedvbstream.cpp:369 recordPids [eDVBServiceStream] ADD PID: 0000
09:46:35.7828 service/servicedvbstream.cpp:369 recordPids [eDVBServiceStream] ADD PID: 0014
09:46:35.7828 service/servicedvbstream.cpp:369 recordPids [eDVBServiceStream] ADD PID: 0100
09:46:35.7828 service/servicedvbstream.cpp:369 recordPids [eDVBServiceStream] ADD PID: 1000
09:46:35.7829 service/servicedvbstream.cpp:369 recordPids [eDVBServiceStream] ADD PID: 1001
09:46:35.7829 dvb/demux.cpp:740 start HISILICON: Open demux (/dev/dvb/adapter1/demux0).
09:46:35.7831 base/ioprio.cpp:91 setIoPrio setIoPrio realtime level 7 ok
09:46:35.7831 base/filepush.cpp:372 thread [eFilePushThreadRecorder] THREAD START
09:46:35.7832 dvb/demux.cpp:912 startPID [adenin]add PID 20(0x0014)
09:46:35.7832 dvb/demux.cpp:912 startPID [adenin]add PID 256(0x0100)
09:46:35.7832 dvb/demux.cpp:912 startPID [adenin]add PID 4096(0x1000)
09:46:35.7834 dvb/demux.cpp:912 startPID [adenin]add PID 4097(0x1001)
09:46:35.7837 dvb/demux.cpp:64 openDemux [eDVBDemux] open demux /dev/dvb/adapter1/demux0
09:46:35.8059 dvb/dvbtime.cpp:478 updateTime [eDVBLocalTimerHandler] Transponder time is 12.10.2017 09:46:35
09:46:35.8060 dvb/dvbtime.cpp:491 updateTime [eDVBLocalTimerHandler] diff is 0
09:46:35.8060 dvb/dvbtime.cpp:494 updateTime [eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
09:46:35.8061 dvb/dvbtime.cpp:555 updateTime [eDVBLocalTimerHandler] not changed
09:46:35.8228 dvb/pmt.cpp:202 PATready PATready
09:46:35.8229 dvb/pmt.cpp:213 PATready PAT TSID: 0x002e (46)
09:46:35.8230 dvb/pmt.cpp:242 PATready use pmtpid 1008 for service_id 0206
09:46:35.8230 dvb/demux.cpp:64 openDemux [eDVBDemux] open demux /dev/dvb/adapter1/demux0
09:46:35.8232 dvb/demux.cpp:64 openDemux [eDVBDemux] open demux /dev/dvb/adapter1/demux0
09:46:35.8234 dvb/demux.cpp:64 openDemux [eDVBDemux] open demux /dev/dvb/adapter1/demux0
09:46:35.8235 dvb/demux.cpp:64 openDemux [eDVBDemux] open demux /dev/dvb/adapter1/demux0
09:46:35.8900 dvb/pvrparse.cpp:909 processPacket broken startcode
09:46:35.8903 dvb/pvrparse.cpp:909 processPacket broken startcode
09:46:35.8904 dvb/pvrparse.cpp:909 processPacket broken startcode
09:46:35.8924 base/wrappers.cpp:66 singleRead singleRead error (Connection reset by peer)
09:46:35.8925 service/servicedvbstream.cpp:81 stop [eDVBServiceStream] stop streaming m_state 2
09:46:36.0035 dvb/pvrparse.cpp:909 processPacket broken startcode
09:46:36.0037 dvb/pvrparse.cpp:909 processPacket broken startcode
09:46:36.0037 dvb/pvrparse.cpp:909 processPacket broken startcode
09:46:36.0038 dvb/pvrparse.cpp:909 processPacket broken startcode
09:46:36.1926 base/filepush.cpp:439 stop [eFilePushThreadRecorder] stopping thread.
09:46:36.2024 dvb/demux.cpp:674 flush [eDVBRecordStreamThread] cancelling aio
09:46:36.2026 dvb/demux.cpp:684 flush [eDVBRecordStreamThread] all done
09:46:36.2026 dvb/demux.cpp:607 flush [eDVBRecordFileThread] waiting for aio to complete
09:46:36.2027 dvb/demux.cpp:489 wait [eDVBRecordFileThread] wait: aio_return returned failure: Interrupted system call
09:46:36.2027 dvb/demux.cpp:613 flush [eDVBRecordFileThread] buffer usage histogram (40 buffers of 188 kB)
09:46:36.2028 dvb/demux.cpp:616 flush       1:      2
09:46:36.2028 base/filepush.cpp:423 thread [eFilePushThreadRecorder] THREAD STOP
09:46:36.2031 service/servicedvbstream.cpp:81 stop [eDVBServiceStream] stop streaming m_state 0
09:46:36.4016 dvb/cahandler.cpp:333 unregisterService [eDVBCAService] free slot 0 demux 0 for service 1:0:1:206:2E:A:FFFF0000:0:0:0::TV
09:46:36.4017 dvb/cahandler.cpp:497 ~eDVBCAService [eDVBCAService] free service 1:0:1:206:2E:A:FFFF0000:0:0:0::TV
09:46:36.8677 dvb/dvb.cpp:1523 DVBChannelStateChanged start release channel timer
09:46:36.8678 base/ebase.cpp:279 processOneEvent poll: unhandled POLLERR/HUP/NVAL for fd 54(24)
09:46:36.8679 base/ebase.cpp:279 processOneEvent poll: unhandled POLLERR/HUP/NVAL for fd 70(16)
09:46:36.8692 dvb/streamserver.cpp:194 notifier [eDVBServiceStream] stream ref: 1:0:1:206:2E:A:FFFF0000:0:0:0::TV
09:46:36.8694 dvb/dvb.cpp:1517 DVBChannelStateChanged stop release channel timer
09:46:36.8695 dvb/dvb.cpp:1523 DVBChannelStateChanged start release channel timer
09:46:36.8695 dvb/dvb.cpp:1424 allocateChannel use cached_channel, frontend=1
09:46:36.8695 dvb/dvb.cpp:1517 DVBChannelStateChanged stop release channel timer
09:46:36.8696 dvb/pmt.cpp:990 tuneExt allocate Channel: res 0
09:46:36.8696 dvb_ci/dvbci.cpp:786 addPMTHandler [eDVBCIInterfaces] addPMTHandler 1:0:1:206:2E:A:FFFF0000:0:0:0::TV
09:46:36.8697 dvb/pmt.cpp:77 channelStateChanged ok ... now we start!!
09:46:36.8697 service/servicedvbstream.cpp:26 serviceEvent STREAM service event 5
09:46:36.8698 dvb/cahandler.cpp:267 registerService [eDVBCAService] new service 1:0:1:206:2E:A:FFFF0000:0:0:0::TV in adapter 1.
09:46:36.8698 dvb/cahandler.cpp:285 registerService [eDVBCAService] add demux 0 to slot 0 service 1:0:1:206:2E:A:FFFF0000:0:0:0::TV
09:46:36.8699 dvb/demux.cpp:64 openDemux [eDVBDemux] open demux /dev/dvb/adapter1/demux0
09:46:36.8700 service/servicedvbstream.cpp:26 serviceEvent STREAM service event 6
09:46:36.8700 service/servicedvbstream.cpp:31 serviceEvent [eDVBServiceStream] tuned.. m_state 1 m_want_record 0
09:46:36.8700 dvb/demux.cpp:64 openDemux [eDVBDemux] open demux /dev/dvb/adapter1/demux0
09:46:37.0070 dvb/demux.cpp:631 eDVBRecordStreamThread [eDVBRecordStreamThread] allocated 40 buffers of 188 kB
09:46:37.0071 service/servicedvbstream.cpp:149 doRecord start streaming...
09:46:37.0072 service/servicedvbstream.cpp:332 recordCachedPids [eDVBServiceStream] no cached pids found
09:46:37.0072 service/servicedvbstream.cpp:202 doRecord STREAM: have 1 video stream(s) (1000), and 1 audio stream(s) (1001), and the pcr pid is 0100, and the text pid is ffffffff
09:46:37.0073 service/servicedvbstream.cpp:369 recordPids [eDVBServiceStream] ADD PID: 0000
09:46:37.0073 service/servicedvbstream.cpp:369 recordPids [eDVBServiceStream] ADD PID: 0014
09:46:37.0073 service/servicedvbstream.cpp:369 recordPids [eDVBServiceStream] ADD PID: 0100
09:46:37.0074 service/servicedvbstream.cpp:369 recordPids [eDVBServiceStream] ADD PID: 1000
09:46:37.0074 service/servicedvbstream.cpp:369 recordPids [eDVBServiceStream] ADD PID: 1001
09:46:37.0075 dvb/demux.cpp:740 start HISILICON: Open demux (/dev/dvb/adapter1/demux0).
09:46:37.0078 base/ioprio.cpp:91 setIoPrio setIoPrio realtime level 7 ok
09:46:37.0078 base/filepush.cpp:372 thread [eFilePushThreadRecorder] THREAD START
09:46:37.0079 dvb/demux.cpp:912 startPID [adenin]add PID 20(0x0014)
09:46:37.2178 dvb/demux.cpp:912 startPID [adenin]add PID 256(0x0100)
09:46:37.7858 dvb/epgcache.cpp:1594 startEPG [EPGC] start caching events
09:46:40.0373 gdi/grc.cpp:193 thread main thread is non-idle! display spinner!

O Leandro já disse em outra mensagem que esse problema já foi corrigido... aguarde ele publicar uma versão mais nova.
Não respondo dúvidas por MP. Favor usar o fórum para isso!!! ///// Verifique sempre o status do IKaS ou SKaS em: http://freesatelitalhd.com/forum/index.php?board=21.0 // https://github.com/Notos/awesome-atto-pixel

Offline unknownuser

  • *
  • Sr. Member
  • ****
  • Posts: 26
  • Carma: +0/-1
  • Melhores produtos, melhor suporte técnico https://freesatelitalhd.com/
  • Receptor: Atto Pixel
« Resposta #131 Online: Outubro 12, 2017, 04:14:03 pm »
O Leandro já disse em outra mensagem que esse problema já foi corrigido... aguarde ele publicar uma versão mais nova.

não, ele falava sobre outro problema...